3.
Place the back rack rollers on each side of the culinary tool
rack into the track slots and roll the rack back into the tracks.
\
• Place items so open ends face down for cleaning and
draining.
• Load glasses and cups in mid level rack only. The lower level
rack is not designed for glasses and cups. Damage can occur.
• Place cups and glasses in the rows between tines. Placing
them over the tines can lead to breakage and water spots.
4. Insert front rack rollers on each side of the rack into the track
slots and slide rack partly back into the dishwasher.
5. Close track stops on both sides of rack.
6. Install baskets in the desired position. (See "Culinary Tool
Rack.")
The mid level rack is designed for cups, glasses, and smaller
items. Many items, up to 9" (22 cm), fit in the mid level rack. (See
recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from those
in the drawings shown.
10 place setting
Cup and glass load
China, crystal, and other delicate items must not touch each
other during dishwasher operation. Damage may occur.
Load plastic items in the mid level rack only. Only plastic items
marked "dishwasher safe" are recommended.
Load plastic items so the force of the spray does not move
them during the cycle.
To avoid chipping, do not let stemware touch other items.
Small bowls, pans, and other utensils can be placed in the
mid level rack. Load bowls in the center section for best
stability.
Removable mid level rack inserts
Your dishwasher is shipped with 2 removable mid level rack
inserts. (See illustration below.) The removable rack inserts allow
you to adjust the rack for the type of load you are washing. This is
useful when washing a variety of glassware and dishes.
................
A. Removable rack inserts
B. Insert holding clips
12 place setting
To Next Page
Loading...
