Checkthatgroundingclipisattachedtothelowerpanel.
Positionthelowerpanelbehindtheaccesspanel.Onsome
modelsthereisinsulationontheaccesspanelwhichmust
fallbehindtheinsulationonthelowerpanel.
Holdthetwopanelstogetherandplacethemagainst
dishwasherleg.UsingaPhillipsor1A"screwdriver,reinstall
thescrewsthroughtheholesintheaccesspanelandthe
slotsinthelowerpanel,
Checkthattheloweredgeofthelowerpanelcontacts
thefloor.Adjustif necessary.
Tighten access panel screws.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Plug into a grounded 3 prong outlet. Check that power
supply cord does not touch dishwasher motor or lower
part of dishwasher tub.
Reconnect Power
25
To Next Page
Loading...
