Why my KitchenBoss G322 machine cannot start up?
If your KitchenBoss Kitchen Appliances machine isn't starting, first ensure the power plug is correctly connected to a powered-on socket. If it's still not working, try replacing the power socket. Also, confirm that the water level in the container is above the MIN water line; if not, add water until it's between the MIN and MAX levels.
What to do if KitchenBoss Kitchen Appliances water temperature does not rise or the machine stops?
If the water temperature isn't rising or the machine stops automatically, check the following: 1. Confirm that the cooker has started and the indicator light of the “ON/OFF” key is red. 2. If the water level is too low, add water to between the MIN and MAX levels. 3. Check the fault code displayed on the display and take the corresponding measures.
What to do if KitchenBoss Kitchen Appliances shows a low water level alarm?
If your KitchenBoss Kitchen Appliances is showing a low water level alarm, it could be due to a couple of reasons. First, ensure that you put the sous vide cooker into the water before starting it. Second, check that the water line in the container is above the MIN water line. If it's below, add water until it reaches the appropriate level.
How to fix overheat alarm on KitchenBoss G322?
If you're getting an overheat alarm on your KitchenBoss Kitchen Appliances, it means the heating tube's temperature is too high. To resolve this, add water to the container until the water level is above the MIN water line of the sous vide cooker.
What to do if KitchenBoss G322 Kitchen Appliances timeout alarm?
If you're experiencing a timeout alarm with your KitchenBoss Kitchen Appliances, it could be because the set temperature cannot be reached after heating for over 120 minutes, or you might be using an oversized container with too much water. Try replacing with a smaller container or reducing the amount of water in the container.
How to fix temperature sensor fault alarm on KitchenBoss G322 Kitchen Appliances?
If you're seeing a temperature sensor fault alarm on your KitchenBoss Kitchen Appliances, it indicates an NTC sensor abnormality or damage. First, remove the plug from the socket, plug it back in, and start the machine again. If the issue persists, contact Customer Service Department for maintenance.
Details product specifications like type, model, power, and dimensions.
Explains how to configure temperature unit, buzzer, and language.
Guides on selecting and adjusting recommended cooking recipes.
Instructions for saving and using personalized custom recipe settings.
Procedures for cleaning the sous vide cooker after use.
How to remove mineral buildup from the heating tube.
Guidelines for storing the sous vide cooker properly.
General| Brand | KitchenBoss |
|---|---|
| Model | G322 |
| Type | Vacuum Sealer |
| Sealing Width | 3mm |
| Max Bag Width | 30cm |
| Product Type | Food Vacuum Sealer |
| Material | Plastic |
To Next Page
