Clean the ice cube maker thoroughly before using it:
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by
unplugging the drain cap on the front bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild
detergent solution and warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. If the unit is not used, drain all the water and dry the tank.
15.
Cleaning & storage
Self-cleaning
1. If the product will not be used for an extended period of time, it is advised
to store the product in its original packaging in a cool dry place.
2. When the machine is not used for a long time, drain the water completely
and dry the interior.
1. Plug on the unit and press “ON/OFF” button on control panel for more
than 5 seconds.
2. The self-Cleaning program needs 30 minutes.
3. The "S, L" indicator flashes on during cleaning.
4. After cleaning, drain the water from the inner tank through the
drainage cap at the bottom of the machine.
Storage
To Next Page