10
11
Using the speaker
Bluetooth
– (Vol+) Press and hold the button on the speaker
– (Vol–) Press and hold the on the speaker
– (Play/Pause) Press the Play/Pause button (May not work
on all devices)
– (Next track) Quick press the button
– (Previous track) Quick press the button
Note:
All of the above functions can also be controlled on the device
being used.
Micro SD card
Firstly, you will need to prepare a micro SD card before use in the
Cadet. The Cadet supports micro SD cards from 4 GB to 32 GB in
size. To prepare the micro SD card:
1. With the Cadet turned off, insert your micro SD card into the
micro SD slot
2. Connect the Cadet to your PC using the micro USB cable
3. Open ‘Computer’ then right click on the ‘Removable disk’
4. Click ‘Format’
5. Make sure the file system is set to ‘FAT32’ then click ‘Restore
device defaults’ followed by ‘Format’
6. Once formatted, copy your music to the ‘Removable disk’
ensuring it is in a compatible format (see specifications)
7. Remove the micro USB cable from the Cadet and turn the
Cadet on
8. The Cadet will start in Bluetooth mode. Press the Power/Mode
button and after 4 seconds you will hear 3 beeps
9. Music will automatically start playing
For track/volume control, it is the same as it is for
Bluetooth mode.
To Next Page
