Kitsound SLAM 70 User Manual

QA-MRK-FM-08-02 v1
REG05 – International – USA, EU, AUS
FRONTCOVER
KSSLA70
KitSound SLAM 70 Bluetooth Party Speaker
Owner’s Manual
INNER LEAF
Please read this manual carefully before use.
WARNING
• Please do not get the product wet. If your product is IP rated, please follow guidelines on
how to safely use your product overleaf.
• Please don’t take the product apart. There are no user serviceable parts inside
• Please don’t modify or alter the product or accessories
• Please don’t expose the product to extreme temperatures or rapid changes of hot to cold or
vice versa
• Please don’t use damaged cables or plugs, or loose electrical sockets
• Please don’t touch the device, cables, plugs, or the electrical socket with wet hands or other
wet body parts
• Please don’t pull the cable excessively when disconnecting it if the cable is not fixed
• Please don’t bend or damage the cable
• Please don’t drop or cause an impact to the product or the device
• Please don’t place naked flame sources, such as lighted candles, on the product
Battery Information
• Batteries may malfunction if they are not used for extended periods
• Over time, unused devices will discharge and must be recharged before use
• Disconnect the charger from power sources when not in use
• Use the batteries only for their intended purposes
• Follow all instructions in this manual to ensure the longest lifespan of your device and battery.
Damages or poor performance caused by failure to follow warnings and instructions can void
your manufacturer’s warranty
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like

Kitsound SLAM 70 Specifications

General

Battery Life	Up to 6 hours
Type	Portable Bluetooth Speaker
Connectivity	Bluetooth 5.0
Power Source	Battery
Output Power	70W
Inputs	3.5mm AUX, USB
Built-in Microphone	Yes

Summary

Quick Start Guide

Lighting and Sound Adjustment

Instructions for adjusting speaker lighting and sound modes via control panel buttons.

Speaker Functions and Controls

Product Functions Overview

Details the numbered functions of the speaker, including buttons and ports.

Getting Started with Your Speaker

Charging the Speaker Battery

Guidance on initial charging, battery life, and power-saving modes.

Understanding LED Indicator Lights

Explanation of different LED light patterns and their meanings during operation.

Bluetooth and TWS Pairing

Pairing the Speaker to a Device

Steps to connect the speaker to a Bluetooth-enabled device.

TWS Pairing for Multiple Speakers

Instructions for pairing two KS Slam 70 speakers together for True Wireless Stereo.

Audio Input and Connectivity

Using the Auxiliary Input

How to connect devices using the 3.5mm aux cable.

Auxiliary and TWS Pairing

Connecting the aux cable to the master speaker in a TWS setup.

Light Mode and Brightness Controls

Adjusting Speaker Lighting Modes

Description of available light modes and how to cycle through them.

Controlling Light Brightness

Instructions for increasing or decreasing the speaker's light brightness.

Sound Modes and Battery Management

Selecting Sound Modes

Details on how to choose between Indoor 360, Outdoor 360, and Shelf sound modes.

Battery Protection Mode Explained

Information on battery protection mode and playtime management.

Specifications and Troubleshooting

Technical Specifications

Detailed specifications including Bluetooth, power, dimensions, and weight.

Troubleshooting Common Issues

Guidance on resolving problems encountered with the speaker.