EasyManua.ls Logo

Kitsound SLAM - Box Contents; Product Functions; Front Panel Controls; Rear Panel Connections

Kitsound SLAM
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 9
Please read this manual carefully before use.
Box contents
Slam portable speaker
Mains AC adaptor
Aux cable
User manual
Functions
On the front:
1. Power light (red/green)
2. Bluetooth light (blue)
3. Volume down button (
)
4. Volume up button (
)
5. Bluetooth/Play/Pause button (
)
6. Power button (
)
On the back:
7. DC 5 V input
8. Aux-in
9. USB 1 A output
10. Battery door
11. DC/BATT switch
Model no.: KSSLAM
Bluetooth speaker
DC Output: 5 V
DC input: 5 V / 3 A
Made in China
SLAM
1
7 9
2
11 8
3 4 5 6
10
Instructions for use
Firstly, you will need to plug the Slam into the mains using the supplied power adaptor. Make sure the
mains plug is connected to the DC 5 V input (7)
Alternatively, the Slam can be powered by 3 x C size batteries. Slide open the battery door and insert
the batteries, observing the correct polarity, then re-fit the battery door
Please make sure the DC/BATT switch (11) is in the correct position depending on whether you wish
to use mains or battery power
When you have finished using the Slam in battery mode, ensure you slide the switch to DC power,
otherwise the batteries will drain when not in use
Note: Please use only non-rechargeable C size batteries. Rechargeable C size batteries may not provide
a high enough voltage to power the Slam. Also, they cannot be recharged by the Slam.

Related product manuals