12 13
Play your music
• To listen to music, dock your iPod or iPhone into the XDock2. Your music will start playing automatically
• To pause your music, press the ‘Menu‘ (2) button. To resume playback, press it again
• To adjust the volume, press Vol+ (4) and Vol- (3)
• To go to the next or previous track, use the ‘Up’ (6) or ‘Down’ (5) button. To search the current track using high speed
forward or rewind, press and hold ‘Up’ or ‘Down’ while the track is playing
Connect other audio devices
You can still listen to any other audio player that is not an iPod or iPhone on the XDock2, by using the Aux-In jack,
located on the rear of XDock2.
• Insert the plug of a 3.5 mm audio cable into the HEADPHONE or LINE-OUT jack on your audio device, then insert
the other end of the cable into the Aux-In (10) jack, located on the rear of XDock2
• To put the XDock2 into the aux mode, press the ‘Power/Mode’ (1) button until the aux icon appears
• Turn your device on, press play, and enjoy your music
Listen to the radio
For the best FM radio clarity, fully extend the wire antenna, located on the rear of the XDock2. It is important not to
alter, obstruct or attach other antennas to this wire antenna.
• To turn the radio on, press the ‘Power/Mode’ (1) button until the radio icon appears on the LCD screen. Tune in a
desired station, press the ‘Up’ (6) or ‘Down’ (5) button to search manually
• Press and hold ‘Up’ (6) or ‘Down’ (5) until the numbers start changing to auto scan for the next station
• To save the station to a preset, press and hold the ‘Menu’ (2) button until the MEM icon flashes on the screen,
then press ‘Up’ (6) or ‘Down’ (5) to save it into a channel from 1 to 10. Press the ‘Menu’ (2) button to confirm
• To listen to the preset station when in radio mode, press the ‘Menu’ (2). The MEM icon will be lit and the display will
show a ‘CH’ with a number next to it. Select the preset by pressing ‘Up’ (6) or ‘Down’ (5) and ‘Menu’ (2) to confirm
To Next Page
Loading...
