1110
Setup mode – Available settings
MENU FUNCTION
Video resolution
Change the resolution for when in video mode. Higher resolutions
will record in better quality but will take up more memory
[1280 x 720p] / [640 x 480p]
Date stamp
This function can be used to add a visible time and date stamp
to the media. Please note you must also manually set this using
the ‘Date/Time’ setting
[OFF] / [ON]
Motion detection
This function can be used to start a recording when motion is
detected in front of the camera
[OFF] / [ON]
Loop recording
This function can be used to break up video les. When this option
is turned on and the camera is recording, a video will automatically
be split into smaller les based on the chosen time frame
[OFF] / [1Min] / [3Min] / [5Min]
Record audio
This function can be used to mute the microphone
[OFF] / [ON]
Exposure
This function will change how light or dark your media will appear
[+2.0] / [+5/3] / [+4/3] / [+1.0] / [+2/3] / [+1/3] / [+0.0] / [-1/3] /
[-2/3] / [-1.0] / [-4/3] / [-5/3] / [-2.0]
Camera resolution
Change the resolution for when in photo mode. Higher resolutions
will take better quality images but will take up more memory
[5MP] / [3MP] / [2MP] / [1.3MP]
Delete
This function can be used to permanently delete media
[Delete Current] / [Delete All]
Protect
This function can be used to protect media from being overwritten
[Lock Current] / [Unlock Current] / [Lock All] / [Unlock All]
Volume
Adjust the built-in speakers volume
[0-8]
[continued...]
To Next Page
Loading...
