What to do if my Kitvision Action Camera cannot be turned on?
If your Kitvision Action Camera fails to turn on, the battery might be completely discharged. Try recharging the battery to resolve this issue.
Why is the red LED flashing during recording on my Kitvision Action Camera?
The red LED flashing during recording on your Kitvision Action Camera indicates a low battery. You should recharge the battery as soon as possible.
What to do if my Kitvision Action Camera cannot take photos or video, and the green LED is flashing?
If your Kitvision Action Camera cannot take photos or video and the green LED is flashing, it means the memory is full. Replace the memory card with an empty one.
What to do if my Kitvision Action Camera LED flashes and turns off?
If the LED on your Kitvision Action Camera flashes and the camera turns off, it's likely due to a flat battery. You should recharge the battery.
General| Brand | Kitvision |
|---|---|
| Model | rush hd100W |
| Category | Action Cameras |
| Language | English |
Details the primary capabilities and specifications of the camera, including video resolution and battery life.
Identifies and describes the purpose of each button, port, and indicator on the camera body.
Procedures to ensure the back cover is properly sealed for optimal waterproof protection up to 10 meters.
Details how to start, stop, and manage video recording, including resolution selection and status indicators.
Steps to enable and prepare the camera's Wi-Fi function for wireless connections.
Instructions for fitting the tilting head adaptor and quick release adaptor to the camera's tripod socket.
Provides solutions for common problems such as power issues, LED indicator errors, and connection failures.
Lists detailed technical data including sensor, lens, video/photo formats, storage, power, and dimensions.
To Next Page
