Kitvision rush hd100W - Connecting the Camera; Connecting to PC via USB; Running the Software

18 19
Connecting your camera
Connecting your camera to a PC via USB
The unit can be connected to a computer as a mass storage device to transfer photo/video files for storage.
1. Connect your camera to a PC via the USB cable included
2. Press the ‘Power’ button to turn the camera on.
When the camera is connected to the computer as a mass storage device, you can:
• OpenthemicroSDfolderandbrowsethelessavedinthecamera
• FormatthemicroSDcard
Note:Ifyoucannotndthedevice,unplugthecablefromthePC,turnthecameraonandoffonceand
reconnect to the PC.
Running the software
1. InsertamicroSDcardwithatleast2MBoffreespaceintoyourcamera.
2. Connect your camera to a PC via the USB cable included.
3. Press the ‘Power’ button to turn the camera on.
4. OpenthemicroSDcardfolderinsidelemanagerandyouwillndthele“actionplus.exe”.Clickontheletoopenit
(PC only).
Ifyoucannotndactionplus.exeinyourmicroSDfolder,unplugthecablefromthePC,turnthecameraonandoffonce
and reconnect to the PC.
Using the software, you can:
• Changethephotosetting–photoresolutionandmode
• Changethevideosetting–FHDandHDresolution
• Changethecamera’sgeneralsettings–TVtype,language,autopoweroff,autorotation,dateandtime
Connecting your camera to a TV/HDTV
YoucanconnectyourcameratoaTVorHDTVviatheHDMIcable(notincluded).Onceyouareconnectedyoucan:
• TakephotosorvideosbyusingyourTVasaviewnder
• Playbackallphotoandvideolessavedinthecamera
• Deletelessavedinthecamera
• FormatthemicroSDCard