8 9
• When the camera is set to video recording mode you can manually
start or stop the recording by pressing the Record start/stop
button (8) on the top of the camera
• When recording, the timer in the top right corner of the LCD
screen (2) will be red and a red circle is visible on the top left.
As default, the camera will begin recording automatically when
it is connected to power through the USB cable, unless there is
no micro SD card inserted into the camera
• When in still capture mode, it will allow you to press the Record
start/stop button (8) at any time to capture a 12 megapixel
photograph
• When in playback le viewer mode, press the Up (5) and Down (7)
buttons to choose a video clip, and the Record start/stop button (8)
to view the selected video. You can delete the selected clip by
pressing the Menu button (6) and choosing the delete option by
pressing the Record start/stop button (8)
Menu and settings
With the camera powered, you enter the menu by pressing the
Menu button (6).
• The menu can then be navigated using the Up (5) and Down (7)
buttons, using the Record start/stop/OK button (8) to conrm
any selections, and the Menu button (6) to go back a step.
[...continued] Changing the mode of the camera
To Next Page
Loading...