Kitvision Venture - Video Settings

1110
Reset to Factory
This function can be used to reset the camera back to its
default factory settings. This will not delete any media
[Cancel]/[Conrmation]
Firmware Version
Select this option to view your model number and rmware
version. Press Power/Mode (12) to exit this screen.
Video Settings
Video resolution
Change the resolution when in Video Mode. Higher resolutions
will record in better quality but will take up more memory
[4K @ 30fps]/[2.7k @ 30fps]/[1080p @ 60fps]/[1080p @ 30fps]/
[720p @ 120fps]/[720 @ 60fps]/[720p @ 30fps]
Recording Sound
This function can be used to mute the microphone [OFF]/[ON]
Time Lapse
Create a Time Lapse video by combining one frame from each
[Close], [0.5s], [1s], [2s], [5s], [10s], [30s], [1min] interval
Loop Recording
This function can be used to break up video les. When this
option is turned on and the camera is recording, a video will
automatically be split into smaller les based on the chosen
time frame [Close]/[2Min]/[3Min]/[5Min]
Slow Motion
Select this function to record videos in slow motion. Available
resolutions are [1080p @ 60 fps]/[720p @ 120 fps]
Settings and features explained