1716
Troubleshooting
No power Remove the battery and SD card from the camera and wait for
ve minutes. Insert the battery, leave the camera o and charge
the camera for 1 hour. Then turn the camera on while still
connected to the power source.
No SD card Check that there is a compatible and formatted SD card in the
camera’s Micro SD card slot (13).
SD card error Save les you want to keep onto a PC and then format the SD
card. (Formatting will permanently delete all les on the SD card.)
Camera won’t turn on Check the battery is installed correctly with the Battery door (7)
closed and the Battery Door Latch (6) secure. Charge the camera
using a mains power adaptor.
Blurry photos Ensure that you always hold the camera still or use a tripod (not
included) whilst taking still photos.
We hope you’ve now got all the information you need to get started, but if you’re having
problems with anything, please feel free to contact us at: support@kitvision.co.uk or visit
www.kitvision.co.uk
Care for your Venture 4K Action Camera
Please DON’T
• Get the camera wet, unless sealed in the included waterproof case
• Drop the camera as this will invalidate your warranty
• Open up the camera. There are no user serviceable parts inside
• Expose the camera to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO
• Clean the camera with a soft dry cloth and no detergents
• Clean the waterproof case after it has been in water (salt especially) with fresh tap water
• Use a soft dry cloth to wipe the surface of the camera, then leave in a cool, ventilated place
to dry
To Next Page
Loading...
