Sauna
PAGE 6
50701162/12.12
7. Operation
I/O A D C B
Unit/button: Description:
A Cubicle light button
B Button Start
C LED SAUNA
D Rotary knob temperature
7.1. Switching the cabin light On/Off
Press button A.
7.2. Switching stand-by mode
On/Off
1. Press button I/O.
With the main switch activated the control system
is on stand-by and the control panel can be
operated with the keypad.
I/O
Main switch
Prerequisite for the following operations:
The control system is switched to stand-by. Permanently lit SAUNA LED indicates
standby mode.
7.3. Starting bathing type Sauna
Fire risk!
Before starting up the controller, always check that there are no combustible objects on
or near the sauna stove.
1. Press button B.
LED SAUNA C flashing. The sauna heater switches On. The sauna is heated and is ready for
bathing after the warm-up period.
After 4 hours, the sauna heater switches Off automatically.
7.4. Stopping Sauna mode
1. Press button B.
The LED SAUNA C changes to permanent light. The sauna heater is shut Off.
The control system is in stand-by mode.
2. To switch Off the control system switch Off main switch at the control system.
The LED SAUNA C goes out.
To Next Page
Loading...