Klarstein 10029708 - Remote Control Display Details

35
Display on the remote control
FAN
OPER
AUTO
AIR
HEALTH
FILTER
TURBO
ON/OFF
HOUR
X-FAN
HUMIDITY
send signal
health mode
X-fan
set temperature
turbo mode
TIMER ON/TIMER OF
F
set time
left & right swing
Up & down swing
set fan speed
light
Clock
Sleep mode
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
air mode
Operation mode
Notes:
• This is a general use remote controller, it could be used for the air conditioners with multifunction; For
some function, which the model doesn't have, if press the corresponding button on the remote controller
that the unit will keep the original running status..
• After putting through power, air conditioner will give out a sound and operation indicator
is ON (red
indicator). You can operate the air conditioner through the remote controller.
• Wenn das Gerät eingeschaltet ist, blinkt nach jedem Tastendruck das Sendesymbol
auf der Fernbedi-
enung einmal auf.
• Wenn das Gerät ausgeschaltet ist, erscheint auf der Fernbedienung die eingestellte Temperatur. Im eing-
schalteten Zustand zeigt das Display der Fernbedienung das Symbol fürs Hochfahren an.
1 ON/OFF button
• Press this button can turn on or turn off the air conditioner.
• After turning on the unit, operation indicator
on indoor unit is ON (green indicator. Color may be differ-
ent for different models)and indoor unit gives out a sound.