Klarstein 10030844 - User Manual

Questions and Answers

L
Laura GreeneAug 11, 2025
What to do if the F symbol flashes on my Klarstein 10030844 Ice Maker?
- L
  Lydia WhiteAug 11, 2025
  If the symbol is lightening and the letter “F” flashes on your Klarstein Ice Maker, it could mean one of two things. First, there might be too much ice, in which case you should remove some ice cubes. Alternatively, there might be no ice cube inside. In that case, remove any obstacles or clean the inside wall of the ice storage. If it still doesn’t start, press “SELECT” for more than 5 seconds to run the ice making for 10 cycles at most.
K
Kimberly BrewerAug 17, 2025
How to fix the flashing arrow symbol on my Klarstein Ice Maker?
- J
  Joseph EllisAug 17, 2025
  If the symbol is lightening on and the arrow flashes on your Klarstein Ice Maker, it means there is a lack of water. To resolve this, stop the ice maker, fill it with water, and press the “ON/ OFF” button again to restart the unit.
A
andrewbellAug 23, 2025
Why is my Klarstein 10030844 cycle normal but no ice is made?
- A
  Andrea GarrettAug 23, 2025
  If your Klarstein Ice Maker is running normally but not producing ice, it could be due to several reasons: * The ambient or water temperature in the inner tank might be too high. Try running the ice maker below 32°C and use colder water. * There could be a refrigerant liquid leakage or a blocked pipe in the cooling system. You should ask a qualified technician to verify these issues.
J
John ButlerAug 29, 2025
Why do ice cubes stick together in my Klarstein 10030844 Ice Maker?
- C
  Christopher WestAug 29, 2025
  If ice cubes on the evaporator stick together in your Klarstein Ice Maker, it could be due to: 1. The ice cycle being too long. Stop the ice maker and restart it after the ice blocks melt. Also, select the small size ice cube option. 2. The water temperature in the inner tank being too low. Change the water in the inner tank, ensuring the temperature is between 7°C and 32°C.
B
Brett HendersonSep 3, 2025
What to do if my Klarstein 10030844 Ice Maker won’t dispense ice?
- M
  Michael McdanielSep 4, 2025
  If your Klarstein Ice Maker has ice cubes inside but won’t dispense them when you push the “ICE” button, the moving shaft for the ice cube may be blocked. Release the button for ice-cube for 3 seconds, then push the “ICE” button again.