13
Product Description and Accessory
Equipment Parts
A Mounting Bracket
B Downrod Set
C Canopy
D Decorative Cover
E Fan Body
F Glass Shade
G Blade Brackets x5
H Blades x5
Remote Control
a Transmitter
b Transmitter Cover
c Receiver
d Wall bracket For Transmitter
e Battery
f Manual For Remote Control
g Accessories Packet
Accessories Packet
h Expansion Screws x2 (Optional)
i Screws For Mounting Bracket x2
j Clasp x1 (Optional)
k Blade Bracket Screws x11
l Blade screws x16
m Blade washer x16
n Wire Connector x3
o Balance Pack x1
Needed Tools
• Philips Screwdriver
• Slotted Screwdriver
• Adjustable wrench
• Cutter
• Ladder
Important Hints
The transmitter is designed for use with either wall bracket for transmitter (d) or the transmitter cover (b). Place
the parts from (g) shown above, in a small container to prevent parts from getting lost. If any parts are missing,
contact your local retailer for replacement before proceeding.
To Next Page
Loading...
