22
EN
INSTALLATION
Before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that
the air conditioning is in the upright position and the air conditioning should be placed
on a at surface. Do not install and use the air conditioning in the bathroom or other
humid environments.
1. Install the heat pipe assembly (as shown in Fig.1): screw the heat pipe assembly
(exhaust tting end) into the exhaust port on the rear panel.
2. Move the machine with installed heat pipe and ttings before the window, and the
distance between the body and walls or other objects shall be least 50 cm.
3. Lead the tube to the outside (through windows slits, a balcony door, etc.)
The length of the exhaust hose shall be 280~1,500 mm, and this length is based on
the specications of the air conditioning. Do not use extension tubes or replace it with
other different hoses, or this may cause a malfunction. Exhaust host must be not blocked;
otherwise it may cause overheating.
To Next Page
Loading...
