33
EN
CARE AND CLEANING
For the sake of good appearance and reliability, keep the unit clean. The modern design
of the unit facilitates maintenance to a minimum. The parts of the unit which come into
contact with food have to be cleaned regularly.
• Before any maintenance and cleaning, disconnect the power.
• Set all controls in the OFF position. Wait until the inside of the unit is not hot but only
lightly warm- cleaning is easier than when warm.
• Clean the surface of the unit with a damp cloth, soft brush or ne sponge and then
wipe dry.
• In case of heavy soiling, use hot water with non- abrasive cleaning product.
• For cleaning the glass of the oven door, do not use abrasive cleaners or sharp
metal scrapers, these can scratch the surface or lead to the glass being damaged.
• Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
• Do not use a high pressure cleaner for cleaning the unit. The baking pans may be
washed in milddetergent.
Bulb Replacement
To replace the lamp, follow these steps:
1 Unplug the device from the power outlet.
2 Loosen the lamp cover by turning it counterclockwise (it
may be very tight) and replace the lamp with a new lamp
of the same type.
3 Reattach the lamp cover.
To Next Page
Loading...
