23
EN
HANDLE INSTALLATION
1
Pull away the door gasket in the area where the handles is to be installed.
The gasket is easily displaced by hand, no tools are necessary.
2
Insert the washer and screw into
door gasket slot, please note the
washer must be inside the slot and
screws pass through the door frame.
3
Align the handle with the screws and tighten the screws until the handle is
both ush and secured tightly against the door frame(DO NOT over-tighten
as this will cause damage to the handle assembly and door glass surface.
4
Restore the door gasket into its original position to nish handle installation.
To Next Page
Loading...
