Klarstein 10033689 - Cleaning and Care; Cleaning the Beer Tap Mechanism

41
EN
CLEANING AND CARE
Cleaning beer tap mechanism

or for long time use (Advice to clean per week), clean the whole machine with dry cloth.

1. Load the warm water into the cleaning kit.
2. And connect the end of piercing pin, press the water into the pin to clean the pin
tube, and push the water out from the beer tube at the other end. And repeat this
cleaning work till the beer tube clean (need 3 bottles warm water at least). Please

Note
Beer connector must connect with
dispensing unit.
Dispensing
unit
This connector must be connected
with the air bulb.
Please
open the
faucet
when
you are
cleaning
the beer
tube.
Air bulb
Figure 22 Figure 23
Note: Never put the tap mechanism parts in the washing machine or dishwasher.

is recommended.