32
EN
INSTALLATION
Note: Before using this unit, please keep it upright for at least 3-4 hours.
• This unit can easily be moved from one room to another.
• While moving the unit please note that it must always be kept upright and then
placed on an even surface.
1
Attach the shtail connector to the end
of the hose, by extending the end and
twisting until rmly attached (At least
3full rotations).
2 3
50CM
50CM
Attach the connector on the opposite
end of the pipe to the exhaust outlet on
the rear of the appliance by putting into
position and twisting to lock in place.
Make sure the unit is upright and there
are no obstructions to the air inlets and
outlet grills.
To Next Page
Loading...
