19
EN
2. When you turn on the device for the rst time to draw hot water, please put
part of the water at room temperature rst, and then put hot water to avoid
burns.
3. Unlock button: Lock the button when no water comes out or the machine is
running 10 minutes later.
4. The key lock occurs when no water has drained for 10 minutes or no key has
been pressed.
Water change
When the indicator lights up, it means that there is a shortage of water in the
raw water tank. Pour out the waste water from the raw water tank and replace it
with municipal tap water.
Standby
After the machine produces water and no button is pressed to draw water within
1 hour, the machine will automatically enter sleep mode to save power. When the
random water temperature button is touched, the machine will wake up, exit sleep
mode and enter standby mode.
To Next Page
Loading...