EasyManua.ls Logo

Klarstein BAROSSA 29D - Troubleshooting

Klarstein BAROSSA 29D
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
EN
Power cut
Most power cuts can be resolved within a short time. To protect your wines during a
power cut, avoid opening the door as much as possible. During longer power cuts,
take the necessary measures to protect your wine.
Out of service for long time
Remove all bottles from the appliance, unplug the appliance, thoroughly clean the
inside and outside of the appliance and store the appliance safely and properly.
Note: If the appliance is disconnected or if there is a power cut, wait at least ve
minutes before re-starting.
Moving the appliance
Cut off the power supply and unplug the appliance.
Remove all bottles from the appliance.
When moving the appliance, do not turn the appliance more than 45°.
TROUBLESHOOTING
Problem Possible cause and suggested solution
The appliance makes lots of noise.
Adjust the front foot, keeping the appliance
level.
Keep the appliance away from walls.
Liquid owing can be heard from
inside the appliance.
This is normal due to the refrigerant working
inside.
The appliance does not start.
Make sure the appliance is connected to
the power properly.
Make sure you have switched on the power.
The compressor will re-start 5 minutes after
a power cut.
The compressor is running
continuously.
If the appliance is not cooling down
properly, call the after-sale service.

Related product manuals