35
EN
Light settings
• F1: Light adjustment in 5 modes
n1 ashes when changing colour
n2 is always on for one colour
n3 ashes for single colours
n4 ashes when light pulses with changing colours
n5 ashes when light pulses in one colour
• F2: Adjusting the light colour
You can choose between 7 colours: red, green, blue, yellow, purple, turquoise and
white. The colour setting is only relevant for the “n2” mode.
• F3: Adjusting the brightness
The brightness can be adjusted in 5 different levels.
The brightness setting is only relevant for the modes “n1”, “n2” and “n3”.
Memory function
After a power failure or when the mains plug is plugged back into the socket after
a longer period of time, the settings will be the same as before the power failure.
It does not matter how long the power failure has lasted.
To Next Page
Loading...
