Klarstein FWT-35F - Table of Contents

8
Instruction Manual
Thank you for purchasing our bladeless fan We’ll provide you with quality products and service.
Toensureyouaresatisedwiththeproductandproperlycleanandmaintainit,pleasereadtheinstruction
manual carefully before use.
Also, please take good care of this manual for future reference.
Content
1. Electric safety and maintenance
2.Specications
3. Operating guidance
4. Remote control instruction
5. The receiving signal range of remote control
6. Cleaning
7. Troubleshooting guide
Electrical safety and maintenance
WARNING:
Toavoidre,electricshock,personalinjury,besuretocomplywiththefollowingrequirements.
1. Children, the elderly and people with disabilities or lacking experience should be under care and
guidance of a responsible person when using this product.
Children should be under supervision to ensure that they will not play with the fan as a toy.
Please use a separate outlet in accordance with the fan’s current/voltage. Don’t
2. use more than one electrical appliance at the same time on the same outlet.
3.Ifthefandoesnotworkduetodamagedpowercord,pleasecutothepowerandaskforaqualied
person to repair.
4. Don’t move the fan until you unplug it from the outlet.
5. Don’t unplug by pulling on cord. You should unplug and grasp the plug, not the cord.
6. Don’t operate the fan with a damaged cord or plug. Please ask a service agent to replace or repair the
cord if cord is damaged.
7. Don’t stretch the cord or place the cord under strain. Keep the cord away from heat sources.
8.Don’t run the cord under carpeting; don’t cover the cord with throw rugs, runners or similar coverings.
Arrangecordawayfromtracareastoavoidtrippingoverthecord.
9.Turnoallcontrolsbeforeunplugging.Unplugfromoutletwhennotinuseforlongperiodsoftime.
To avoid a tripping hazard, safely coil the cord.
10. Don’t put any object into the inlet grille. Don’t block the opening. Keep free of dust, lint, hair and
anythingthatmayreduceairow.
11. The fan should be away from any heat source and non-corrosive gas surroundings. It should be
placed on a level horizontal surface. Allow for 150mm space around the fan to ensure good ventilation.