18
EN
SAFETY INSTRUCTIONS
Protection against electric shock
• Have repairs carried out only by trained specialist personnel.
• Only connect the dryer to sockets that correspond to the specied voltage of the
appliance.
• If the power cord is damaged, have it replaced by the manufacturer, customer
service or a qualied person.
• Do not pull the plug out of the socket by the cable, but hold it rmly by hand when
removing it.
• Do not use the power cord if the connection between the plug and the power cord
has become loose.
• Do not handle the plug with wet hands. Remove dust and drops of water with a dry
cloth.
• Do not bend the power cord excessively or place heavy objects on it.
• Do not use the plug, power cord, or outlet if any of these parts are damaged.
Protection against possible explosions
• Make sure that there are no ammable liquids in the vicinity of the device.
• Do not remove or insert the plug if petrol vapours or gas have escaped in the
vicinity.
Fire and short-circuit protection
• Do not place the unit near heat sources or open re.
• Do not place burning candles on the product.
• Do not place the unit in very humid or extremely wet locations.
• Be careful not to expose the product to direct sunlight, as plastic or rubber parts will
age quickly.
• Do not sprinkle the dryer with water for cleaning. Do not use a high-pressure
cleaner.
• To prevent the risk of re due to intensive drying, do not dry cushions, quilts or
similar items inside the appliance.
• Clothing and objects that have come into contact with vegetable and edible oil
after washing must not be dried in the dryer.
• If you have treated your laundry with stain remover, it needs an additional rinse
before drying.
• Before drying, make sure that there are no lighters left in the pockets of your clothes.
• Do not nish the drying process before the end of the program. Remove the
garments quickly at the end of the program so that the accumulated heat can
quickly escape.
To Next Page
Loading...
