30
EN
Code Possible Cause Suggested Solution
E02
When the machine enters Seal
mode, the micro-switch does not
close.
Check if the vacuum lid is closed;
Check if the micro-switch is
correctly tted and functioning
(GAS1 connecting wire, micro-
switch, 10P data cable, etc.)
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of
this product, please contact your local council or your household
waste disposal service.
To Next Page
Loading...
