Klarstein LOIRE - Using the Plant Milk Maker

31
EN
Using the plant milk maker
1
Fill the water tank with water up to the mark,
depending on the amount you want to purée.
Note: To make 600 ml plant-based milk, ll the
water tank with ltered water up to the 600 ml
mark.
Amount of purée
2
Fill the water tank with water, close the water tank lid
and insert the water tank into the device.
3 Insert the residual water tray into the device.
4
Place the milk collection cup on the residual water
tray.
Note: As shown on the right, the milk collection
cup handle faces forward.
5
Turn the housing cover anti-clockwise and ll the
desired ingredients into the device.