Klarstein PAUSA - Control Panel; Operation

16
EN
CONTROL PANEL
A Froth button C One cup
B Two cups D On / o button
OPERATION
First use/preparation of the still-cold coee machine
1. Fill the water tank with water, making sure that the water does not exceed the
maximum mark in the water tank.
2. Remove the funnel from the packaging, insert it into the lter and attach both
to the appropriate place in the device. The handle of the funnel must be at the
mark.
3. Plug the power plug into the mains socket. Then press the button . . The
device will beep. The indicator lights
and will start ashing and the
unit will warm up. Make sure that the steam knob is in the
position.
When the steam knob is in the
position, all four indicator lights will
ash at once and the device will not work.
4. When the indicator lights
and light up steadily, press the button
to rinse the coee lter or coee cup with hot water.