What to do if my Klarstein VARICOOK SLIM doesn't start?
If your Klarstein Hob doesn't start, the issue might be due to fluctuating current, a blown fuse, or an incorrectly inserted plug. Ensure the correct voltage is applied. If the problem persists, contact customer service.
Why is my Klarstein Hob not working even when it's on?
If your Klarstein Hob is on but not working, this could be due to several reasons. The cookware might be empty, or the temperature setting may be incorrect. Also, the air inlet/outlet valve could be clogged. In this case, clean the valves and allow the unit to cool before restarting. Finally, if the unit has been running for 2 hours without input, you need to set a cooking mode or the timer.
Why does my Klarstein Hob keep beeping and interrupting heating?
The Klarstein Hob may beep and interrupt heating due to incompatible cookware, the absence of cookware on the hotplate, or if the cookware is not centered. To resolve this, ensure you are using cookware suitable for induction stoves and place the cookware in the center of the hob.
What to do if my Klarstein VARICOOK SLIM displays error code ES?
If your Klarstein Hob displays the error code ES, it indicates that the overheating protection has been triggered. Wait a few minutes to allow the appliance to cool down. Also, check the cookware you are using.
Why does my Klarstein VARICOOK SLIM show error E3?
Error E3 on your Klarstein Hob means that the current voltage is too high. Check the power source and connect the appliance to a suitable power outlet.
Why does my Klarstein VARICOOK SLIM Hob show error E4?
Error E4 on your Klarstein Hob indicates that the current voltage is too low. To resolve this, check the power source and connect the device to a suitable power outlet.
What to do if my Klarstein VARICOOK SLIM Hob displays error code E6?
If your Klarstein Hob shows error code E6, it means there is a problem with the fan or the air inlet is blocked. Allow the unit to cool, then clean the vents and restart the appliance. If the problem continues, contact a specialist company for inspection.
What to do if my Klarstein VARICOOK SLIM displays error code E2?
If your Klarstein Hob displays error code E2, it indicates a problem with the temperature sensor. Have the appliance checked and repaired by a professional.
How to fix EO error on my Klarstein VARICOOK SLIM?
The EO error on your Klarstein Hob indicates that you are using unsuitable cookware, or the diameter of the cookware is smaller than 12 cm. Use suitable cookware with a minimum diameter of 12 cm.
What to do if my Klarstein Hob displays error code E1?
If your Klarstein Hob displays error code E1, it means something is wrong with the connection or the internal circuit is broken. Have the device checked and repaired by a specialist company.
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones | 2 |
| Power Output | 3500 W |
| Control Type | Touch Control |
| Power Levels | 9 |
| Timer | Yes |
| Power Supply | Electric |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Child lock | Yes |
| Overheating protection | Yes |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Auto Pan Detection | Yes |
| Safety Features | Child lock, Overheating protection |
To Next Page
