Bedienungsanleitung EK 22 Seite 15
___________________________________________________________________________
Brief inspection before putting into service
Please check immediately if you received all parts mentioned in our basic supply.
Basic supply:
1 Electric-hydraulic crimping unit Type EK 22
1 Battery cartridge (plugged in the unit)
1 Charging unit
1 Instruction manual
Please check according your bill of delivery if you received all requested dies and e.g. a spare
battery cartridge.
Instruction Manual
for the electric-hydraulic crimping unit Type EK 22, Serial-No. ............................
1. Introduction
Before starting to use the tool please read the instruction manual
carefully.
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of this tool must only be
performed by specially trained personnel. The minimum age is 16 years.
This instruction manual has to be carried along during the entire life span of that tool.
The operator has
- to guaranty the availability of the instruction manual for the user and
- to make sure, that the user has read and understood the instruction manual.
2. Labels
On the labels fixed on the housing of the tool you’ll find the type specification
name of the manufacturer and the company logo. On the opposite side of the housing you’ll
find a label with a brief presentation of the scope of manageable cross-sections for copper
and aluminium, the pressing force and the serial number.
On the crimping head you’ll find a warning against possible injuries during the crimping
process.
3. Warranty
If correct operation is guaranteed and regular service is provided our warranty is 6 months
from the time of delivery.
To Next Page
