To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools ET160 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Resistance Measurement Range | 0.1 Ω to 40 MΩ |
| Safety Rating | CAT III 600V |
| Display Count | 4000 |
| Backlight | Yes |
| Measurement Functions | AC/DC Voltage, AC/DC Current, Resistance, Continuity, Diode |
| Battery | 2 x AAA |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Voltage Measurement Range | AC: 0.1V to 600V, DC: 0.1V to 600V |
| Current Measurement Range | AC: 0.1A to 10A, DC: 0.1A to 10A |
Details the audible/visual alerts, detection range, sensitivities, calibration, response time, sensor, probe, power, operating conditions, dimensions, weight, and standards.
Ensures safe operation by following instructions, proper calibration, avoiding hazardous conditions, and using PPE.
Identifies and labels all physical components and buttons on the front and back of the tester.
Explains the meaning of various warning and informational symbols displayed on the meter.
Details the purpose and operation of each function button on the tester.
Provides step-by-step instructions for turning on, calibrating, and using the refrigerant leak detector.
Instructions for replacing the AAA batteries when the low and high alert lights are illuminated.
Guidance on when the sensor has failed and how to contact for servicing.
Instructions for cleaning the tester using a clean, dry lint-free cloth.
Recommendations for storing the tester to maintain its condition during periods of non-use.
Information on where to find warranty details.
Guidelines for proper disposal and recycling of the equipment.
