To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools CL800 and is the answer not in the manual?
General| Category | Clamp Meter |
|---|---|
| True RMS | Yes |
| Resistance | 60MΩ |
| Continuity | Yes |
| Diode Test | Yes |
| Inrush Current | Yes |
| Backlit Display | Yes |
| Operating Altitude | 6562 ft (2000 m) |
| Battery | 2 x AAA |
| Safety Rating | CAT IV 600V, CAT III 1000V |
| AC Voltage | 600 V |
| DC Voltage | 600 V |
| Capacitance | 6000 µF |
| AC Current | 600A |
| DC Current | 600A |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
Details voltage ranges, resolution, and accuracy for AC and DC.
Details current ranges, resolution, and accuracy for AC and DC.
Essential safety guidelines for meter operation and handling.
Warnings related to electric shock hazards and battery replacement.
Explains NCV function, indications, and factors affecting detection.
Covers NCV safety, shielded wires, and environmental impacts.
Guide to using the NCV function for voltage detection.
Safety guidelines for testing in CAT III and CAT IV environments.
Detailed steps for measuring AC/DC current using the clamp.
Steps for measuring AC/DC voltage up to 1000V.
Procedure for measuring low impedance AC/DC voltage up to 600V.
How to perform continuity tests with audible feedback.
