To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools CL312 and is the answer not in the manual?
Proper procedure for connecting test leads to the meter and the circuit.
Safety precautions for using the meter in high-voltage measurement environments.
Guidelines for using the meter in standard wall outlets and lower-risk locations.
Procedure for measuring AC current using the clamp feature.
Steps for measuring AC and DC voltage using the test leads.
Proper procedure for connecting test leads to the meter and the circuit.
Safety precautions for using the meter in high-voltage measurement environments.
Guidelines for using the meter in standard wall outlets and lower-risk locations.
Procedure for measuring AC current using the clamp feature.
Steps for measuring AC and DC voltage using the test leads.
General| Type | Clamp Meter |
|---|---|
| Data Hold | Yes |
| Auto Power Off | Yes |
| Continuity | Yes |
| AC Current Range | 0 to 400 A |
| AC Voltage Range | 0 to 600 V |
| DC Voltage Range | 0 to 600 V |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Safety Rating | CAT III 600V |
| Standards | IEC 61010-1 |
