Need help?Do you have a question about the Klein Tools CL330 and is the answer not in the manual?
General| Type | Clamp Meter |
|---|---|
| Continuity | Yes |
| Frequency | Yes |
| Diode Test | Yes |
| Battery Type | 2 x AAA |
| Auto Power Off | Yes |
| Low Battery Indicator | Yes |
| Category | Electrical Tester |
| Display | LCD |
| Safety Rating | CAT III 600V |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Specifications for diode test, frequency, duty cycle, and display.
Explanation of symbols found on the meter and its display.
Instructions for powering the meter on, off, and adjusting display brightness.
Using the SELECT button and understanding dual display lines.
Instructions for using auto-ranging, manual range selection, and MAX/MIN tracking.
How to freeze and release measurement readings on the display.
Proper connection of test leads and safety for CAT ratings.
Procedure for measuring AC current using the clamp.
Procedure for measuring AC and DC voltage.
How to perform continuity and resistance tests.
Procedures for measuring capacitance and performing diode tests.
Measuring frequency, duty cycle, and temperature.
Understanding the analog representation of measurements.
To Next Page