17
MAINTENANCE
BATTERY REPLACEMENT
When the Battery Strength Indicator shows low battery strength( ),
batteries must be replaced.
1. Remove screw from battery door.
2. Replace 3 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.
T
o avoid risk of electric shock, disconnect leads from any voltage
source before removing battery door.
To avoid risk of electric shock, do not operate meter while
battery door is removed.
NOTE: There are no user-serviceable parts inside meter.
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
