To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools CL600 and is the answer not in the manual?
General| Certification | CE |
|---|---|
| Clamp opening | 35 mm |
| Product color | Black, Orange |
| International Protection (IP) code | IP40 |
| Resistance (max) | 60 Ω |
| Measuring category | CAT III 1000V, CAT IV 600V |
| Carrying case | Yes |
| Battery type | AAA |
| Number of batteries supported | 2 |
| Operating altitude | 0 - 2000 m |
Weight and Dimensions| Depth | 97 mm |
|---|---|
| Width | 231 mm |
| Height | 39 mm |
| Weight | 335 g |
Details on diode test, continuity, sampling rate, auto power off, overload, polarity, and display characteristics.
Explains various symbols found on the meter's body for functions and safety indicators.
Explains the meaning of different icons and indicators displayed on the meter's LCD screen.
Instructions for powering the meter on, off, and managing auto power off functionality.
How to capture and release a measurement value displayed on the screen.
Instructions for activating and deactivating the LCD backlight.
Explains auto-ranging mode and how to manually select measurement ranges.
Proper procedure for inserting test leads into meter jacks for accurate readings.
Guidelines for using the meter safely in higher measurement categories.
How to adapt test leads for use in lower measurement categories.
Step-by-step guide for measuring AC current using the clamp.
Procedure for connecting test leads to measure AC voltage.
Procedure for connecting test leads to measure DC voltage.
How to test for continuity using audible signals and resistance values.
Steps for measuring electrical resistance of components and circuits.
How to perform a diode test and interpret the results.
Instructions on how to safely replace the meter's batteries.
