Klein Tools CL600 User Manual

13
MAINTENANCE
BATTERY REPLACEMENT
When indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery door.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.
T o avoid risk of electric shock, disconnect leads from any voltage
source before removing battery door.
To avoid risk of electric shock, do not operate meter while
battery door is removed.

Klein Tools CL600 Specifications

General

Certification	CE
Clamp opening	35 mm
Product color	Black, Orange
International Protection (IP) code	IP40
Resistance (max)	60 Ω
Measuring category	CAT III 1000V, CAT IV 600V
Carrying case	Yes
Battery type	AAA
Number of batteries supported	2
Operating altitude	0 - 2000 m

Weight and Dimensions

Depth	97 mm
Width	231 mm
Height	39 mm
Weight	335 g