Klein Tools CL600 User Manual

8
ENGLISH
OPERATING INSTRUCTIONS
CONNECTING TEST LEADS
Do not test if leads are improperly seated. Results could cause
intermittent display readings. To ensure proper connection, firmly
press leads into the input jack completely.
TESTING IN CAT III / CAT IV MEASUREMENT LOCATIONS
Ensure the test lead shield is pressed firmly in place. Failure to use
the CATIII / CATIV shield increases arc-flash risk.
TESTING IN CAT II MEASUREMENT LOCATIONS
CAT III / CAT IV shields may be removed for CAT II locations. This
will allow testing on recessed conductors such as standard wall
outlets. Take care not to lose the shields.
5/32"
(4 mm)
.7" (18 mm)
INCORRECT
CORRECT

Klein Tools CL600 Specifications

General

Certification	CE
Clamp opening	35 mm
Product color	Black, Orange
International Protection (IP) code	IP40
Resistance (max)	60 Ω
Measuring category	CAT III 1000V, CAT IV 600V
Carrying case	Yes
Battery type	AAA
Number of batteries supported	2
Operating altitude	0 - 2000 m

Weight and Dimensions

Depth	97 mm
Width	231 mm
Height	39 mm
Weight	335 g