EasyManua.ls Logo

Klein Tools Hydra-Cool 2214 - User Manual

Klein Tools Hydra-Cool 2214
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instructions for Proper Use,
Assembly and Care of Klein
Hydra-Cool
Climber Pads
Model # 2214
ENGLISH
Español pg. 9
Français pg. 17
w ww. . com
information@itm.com1.800.561.8187
Question and Answer IconNeed help?

Do you have a question about the Klein Tools Hydra-Cool 2214 and is the answer not in the manual?

Summary

Introduction to Hydra-Cool Climber Pads

Critical Safety Warning for Use

Emphasizes that equipment must not be used by untrained individuals, warning of serious injury or death.

Hydra-Cool Climber Pad Construction Details

Contents of Hydra-Cool Climber Pads

Assembling the Hydra-Cool Pads to the Climbers

Step 1: Adjusting Climber Sleeve Height

Place adjustable sleeve inside climber, adjust height about 1" below knee, and secure screws.

Step 4: Installing Metal Insert

Install metal insert correctly oriented, matching 'L' or 'R' to pad for proper side installation.

Donning the Assembled Hydra-Cool Pad and Climber to Your Leg

Step 3: Securing Pad with Cinch Loop

Insert free end of pad through metal cinch loop and pull snug, ensuring webbing is not twisted.

Step 6: Securing Free End of Pad

Secure free end around pad by adhering Velcro® hooks to loops, ensuring minimum wrap.

Specific Procedures for Inspecting Hydra-Cool Climber Pads

Check Straps and Pads

Inspect straps and pads for damage, tears, burns, broken stitches, or excessive wear.

Check Metal Insert and Retaining Bar

Verify metal insert and retaining bar are free of cracks, sharp edges, or deformation.

Maintenance Procedures

Webbing Cleaning

Clean webbing with a damp rag and mild detergent, avoiding immersion in water.

Leather Component Care

Maintain leather with Neat's-foot oil or equivalent; clean with mild soap, dry naturally.

General Inspection Procedures

Warnings: Klein Climbers and Pads

Pre-Use Checks for Climbers and Pads

Check gaffs, straps, pads, rivets, and buckles for damage, wear, or defects before each use.

OSHA In-Service Loading Warning

Equipment subjected to in-service loading or fall arrest must be immediately destroyed and discarded.

Minimum Wrap Warning Label

Summary

Introduction to Hydra-Cool Climber Pads

Critical Safety Warning for Use

Emphasizes that equipment must not be used by untrained individuals, warning of serious injury or death.

Hydra-Cool Climber Pad Construction Details

Contents of Hydra-Cool Climber Pads

Assembling the Hydra-Cool Pads to the Climbers

Step 1: Adjusting Climber Sleeve Height

Place adjustable sleeve inside climber, adjust height about 1" below knee, and secure screws.

Step 4: Installing Metal Insert

Install metal insert correctly oriented, matching 'L' or 'R' to pad for proper side installation.

Donning the Assembled Hydra-Cool Pad and Climber to Your Leg

Step 3: Securing Pad with Cinch Loop

Insert free end of pad through metal cinch loop and pull snug, ensuring webbing is not twisted.

Step 6: Securing Free End of Pad

Secure free end around pad by adhering Velcro® hooks to loops, ensuring minimum wrap.

Specific Procedures for Inspecting Hydra-Cool Climber Pads

Check Straps and Pads

Inspect straps and pads for damage, tears, burns, broken stitches, or excessive wear.

Check Metal Insert and Retaining Bar

Verify metal insert and retaining bar are free of cracks, sharp edges, or deformation.

Maintenance Procedures

Webbing Cleaning

Clean webbing with a damp rag and mild detergent, avoiding immersion in water.

Leather Component Care

Maintain leather with Neat's-foot oil or equivalent; clean with mild soap, dry naturally.

General Inspection Procedures

Warnings: Klein Climbers and Pads

Pre-Use Checks for Climbers and Pads

Check gaffs, straps, pads, rivets, and buckles for damage, wear, or defects before each use.

OSHA In-Service Loading Warning

Equipment subjected to in-service loading or fall arrest must be immediately destroyed and discarded.

Minimum Wrap Warning Label

Klein Tools Hydra-Cool 2214 Specifications

General IconGeneral
BrandKlein Tools
ModelHydra-Cool 2214
CategorySafety Equipment
LanguageEnglish

Related product manuals