To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools IR10 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Resolution | 0.1°F/°C |
| Response Time | <500 ms |
| Emissivity | Fixed at 0.95 |
| Distance to Spot Ratio | 8:1 |
| Battery | 9V |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Display | LCD |
| Auto Power Off | Yes |
| Spectral Response | 8-14 µm |
| Laser | Single laser for targeting |
Details on using dual lasers for aiming and measurement area definition.
How to measure temperature using infrared emission.
How to measure temperature using the K-type probe.
Information on how measurement data is held on the display.
Explanation of the automatic power-off feature.
Instructions for activating and deactivating the display backlight.
How to access MIN/MAX/AVG/DIFF statistical parameters.
How to access and configure meter settings like F/ C and alarms.
Instructions for replacing the device's 9V battery.
Guidelines for cleaning the meter, including the sensor lens.
Recommendations for storing the meter to prevent damage.
Information on the product warranty and where to find details.
Instructions for proper disposal and recycling of the equipment.
Contact information for Klein Tools customer support.
