Klein Tools KLEIN OPENER - Mount #4: Plastic Lip

Mount Specic
Instructions
Mount #4: Plastic Lip
This mount is for plastic dumpsters with an inner lip.
This bracket includes 3 torque washers, a spacer, and a
supporting angle bracket (L-shaped attachment).
Each torque washer has 4 tiny sharp prongs which are
necessary for mounting and securing the bracket onto
plastic dumpsters.
Dumpster Top Rail
Mounting Bracket
Spacer
Torque Washers
Supporting Angle Bracket
Outside Dumpster
Inside Dumpster (with plastic lip)
Step 5: For plastic dumpsters mount the bracket 6-12 inches from the back hinge of the
dumpster’s plastic lid depending on how high you want the lid to open. Mounting closer
to the back hinge of the dumpster will raise the lid higher.
continued on page 14
5
13