To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools VDV501-853 and is the answer not in the manual?
General| Test type | PoE tester |
|---|---|
| Display type | LCD |
| Product type | Twisted pair cable tester |
| Product color | Black, Yellow |
| Supported connectors | BNC, RJ-11, RJ-12, RJ-45 |
| Measuring cable length | Yes |
| Battery voltage | 9 V |
| Battery technology | Alkaline |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 178 mm |
|---|---|
| Width | 38 mm |
| Height | 80 mm |
| Weight | 500 g |
Covers dimensions, weight, operating conditions, battery life, and cable types.
Details measurement methods, range, accuracy, and constant settings.
Instructions to prevent severe injury or death during operation.
Explanation of device symbols and identification of connection ports.
Brief overview of button functions for common testing scenarios.
In-depth explanation of each button's operation in various modes.
Details on mode, pass/fail, faults, voltage, battery, and wire map displays.
Explanation of Power over Ethernet indicators and error signals.
Step-by-step guide for measuring voice, data, and coax cable lengths.
Explains the role of length constant for accurate cable measurements.
Guides on setting or modifying length constant for accurate testing.
Procedure to find and set length constant using a sample cable.
Instructions to switch between feet (ft) and meters (m).
Explains how to test for shorts, opens, and miswires in cables.
Steps for testing continuity on installed data and voice cables.
Procedure for testing continuity on installed or terminated coax cables.
Using ID remotes to trace and label data and voice cables.
Using CoaxMap remotes to trace and label coaxial cables.
Using the tone generator and probe to trace data and voice cables.
Using the tone generator and probe to trace coaxial cables.
Testing continuity and identifying cables concurrently using ID remotes.
Procedure to test for voltage and wiring configuration of PoE connections.
Details on PoE pinouts and IEEE standard power parameters.
Visual examples of properly wired, split, short, and miswired cables.
