To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools VDV Scout Pro 3 and is the answer not in the manual?
General| Model | VDV Scout Pro 3 |
|---|---|
| Type | Cable Tester |
| Wire Mapping | Yes |
| Tone Generator | Yes |
| Cable Length Measurement | Yes |
| Display | LCD |
| Power Source | Battery |
| Testing Capabilities | Tests coax, data and telephone cables |
| Weight | 0.5 lbs |
| Included Accessories | Test leads |
Details on measuring cable length using capacitive properties.
Setting the length constant based on cable manufacturer's specifications.
Setting length constant using a sample cable of known length.
Switching between feet (ft) and meters (m) for measurements.
Procedure for testing data and voice cables for continuity.
Procedure for testing coax cables for continuity.
Using location ID remotes to identify RJ45 cables from the distribution point.
Using location ID remotes to identify voice cables from the distribution point.
Using location ID remotes to identify coax cables from the distribution point.
Using the tone generator and probe to trace data and voice cables.
Using the tone generator and probe to trace coaxial cables.
Combining continuity and location ID testing for multiple cables.
Testing for power sourcing equipment (PSE) voltage and PoE standards.
Using the tester to illuminate a network switch port light for identification.
