Klein Tools VDV501-097 User Manual

Instruction
Manual
VDV
Commander
TM
VDV501-097
ENGLISH
• TESTS
CABLES
• MEASURES
CABLE LENGTH
WITH TDR
• DETECTS
FAULTS
• DETECTS AND
MEASURES PoE
• LOCATES AND
IDENTIFIES CABLES
• TESTS ACTIVE NETWORK
• SAVE AND PRINT REPORTS

Klein Tools VDV501-097 Specifications

General

Type	Cable Tester
Model	VDV501-097
Display	LCD
Power Source	9V battery
Overall Width	2.5'' (6.4 cm)
Test Functions	Wiremap, Length
Test Capability	Coaxial, RJ11, RJ45
Cable Types	RJ11, RJ45, Coax

Summary

Device Power Management

Power On, Off, and Auto-Off

Controls device power on/off and automatic power conservation for battery life.

Device Setup and Configuration

Accessing and Navigating Setup Menu

Guide to entering and navigating the device's setup menu for configuration.

Configuration Settings

Details on modifying parameters like VoP, wiring, display units, and timeouts.

Cable Testing Procedures

Testing Guidelines and Safety

Best practices for cable testing, important notes, and safety precautions.

Length and Fault Measurement

How to measure cable length and detect faults using TDR technology.

Performing a Cable Test

Step-by-step guide for executing a basic cable test with the VDV Commander.

Link Light and Tone Generator

Link Light Testing

Tests to identify a hub or switch port by indicating link status.

Tone Generator Functionality

Generates tones to trace cable runs and locate faults using a probe.

Network and PoE Testing

Network and PoE Capabilities

Testing network link capabilities, speed, and PoE presence/class.