LED Indicator Color Status
Solid Red Battery charging (LED off when fully charged)
Flashing Red Low battery
Solid Blue Active Bluetooth® wireless connection
Slow-Flashing Blue Attempting to pair with wireless device
Quick-Flashing Blue Attempting to auto-link to paired wireless device
Solid Green Aux line-in connection (overrides wireless connection)
No LED Unit is off, battery is dead, or battery has finished charging
NOTE: LED may appear purple or yellow if battery is low or is charging.
ON/OFF: Press & hold power button 1 for 3 seconds, a tone will sound. Unit will automatically power off after 10 minutes of
inactivity.
NOTE: Turn unit off when not in use to prolong battery life.
PAIRING: Wireless connection activates automatically and is ready to pair when unit is turned on. On your Bluetooth® wireless
compatible device, enable Bluetooth® and search/scan for devices that can be paired. Select “AEPJS1” when it appears (refer to
the user manual of your device). If necessary, enter “0000” as pairing passcode. A tone sounds after a successful pairing.
NOTE: Unit automatically attempts to connect the last wireless device but is ready to pair with any compatible device if the
last paired device is not detected within 5 seconds of powering on.
DISCONNECT PAIRING: 1) Turn unit off; -or- 2) Double-press Power Button 1 (tone sounds); -or- 3) Plug a cable into Aux jack 6;
-or- 4) turn off Bluetooth® wireless connection in paired device.
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local
regulations.
Please see www.epa.gov or www.erecycle.org for additional information.
To Next Page
Loading...