Picture III Picture IV
Installing/Removing Belt Clip
Installing Belt Clip ( Picture III)
Match the grooves of belt clip with those on the rear of radio and press
the belt clip downwards until it is locked.
Removing Belt Clip (Picture IV)
Use your nail or a tool to lift the metal spring piece in the belt clip from
topside and pull the belt clip upward from the battery pack.
Note:
1. To use belt clip, please install the belt clip onto the battery before the
installing of battery pack.
2. Remove the battery from the radio before the removing of belt clip.
Installing external Earphone/Microphone
1. Uncover the Earphone/Microphone pad. (Picture V)
2. Plug the Earphone/Microphone into the jacks of
connector. (Picture VI)
Picture V Picture VI
6 www.blackboxradios.com
To Next Page
Loading...