READ THIS IMPORTANT INFORMATION CAREFULLY BEFORE
YOU USE THE APPLIANCE AND SAVE IT FOR FUTURE REFERENCE
Do not misuse the appliance to avoid potential injury.
This appliance is intended to be used in household only.
Do not touch the sharp blades when the appliance is plugged in.
If the blades get stuck, unplug the appliance before you remove the ingredients.
Be careful when handling the sharp cutting blades, emptying the bowl and during cleaning.
Switch o and unplug the appliance from the power supply before :
*Removing it from the stand, changing accessories or approaching parts that move in use.
*Assembling, disassembling or cleaning it.
*It is left unattended.
Do not immerse the appliance in water or any other liquid.
Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
Do not use the appliance if the plug, the power cord, lid, or blender jar are damaged or
has visible cracks. If the power cord is damaged, you must have it replaced by Kleva Range ®,
a service centre authorised by Kleva Range® or similarly qualified persons in order to avoid a hazard.
Make sure the lid is properly assembled to the Blender Jar before you use the appliance.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
Children should be supervised to ensure that they do not play with the appliance.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and o by the utility.
Be careful if hot liquid is poured into the Blender Jar as it can be ejected out of the appliance
due to a sudden steaming.
Never assemble or disassemble the Blender Jar to the motor base while the power is on.
Read the ‘User Manual’ before use.
Be careful that the heating element surface is subject to residual heat after use.
WARNINGS
To Next Page
Loading...